Start audio Play Stop Rewind Record armed Record modeOverdub / add Replace / punch in TAPE 00:00.0 Panic Prepare mix MIDI / MPE toSelected instrument
00:00 02:00 04:00 06:00 08:00 10:00
01 / Contour Sound Sequence Effects Motion Evolve Sample / loop Song
16-step phrase Sequence off Record notes Step input Pattern A
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Click empty space to add a note · drag a note to move it · drag its end for length · double-click to remove it
LFO / repeatable movement
MPE / pressure & slide
Pitch stays continuous per note. Pressure and slide retain each instrument’s native MPE response; these assignments add channel movement.
Evolve now Shift timeQuick 1 beat 1 bar 2 bars Starting phrase Randomise phrase
Song mode off Apply chain to all Apply
Each letter plays one bar. Write independent chains of A–H for each track; chains repeat independently. Set a track to Tape-only to arrange against an existing recording.
Connecting saved audio and MIDI devices… STOPPED Disk ready after audio starts.
Save session ↓ Open session
Select your controller in the top bar.
Refresh audio devices InputSystem default Connect audio input Disconnect input OutputSystem default Connect MIDI MPE zoneLower / ch 1 Upper / ch 16 Standard MIDI Pitch bend±48 semitones ±24 ±12 ±2
No audio input connected. Each track can use an instrument, tape, or an interface input.
Saved on this deviceStart audio to find saved sessions Recover audio
Session notes Audio saves continuously to this browser’s private disk. Stop and wait for Saved before closing. Recover audio reopens previous sessions on this device and browser. Save session downloads a portable copy containing all eight tapes, the loop and separate sample, patterns, patches, notes and MIDI mappings. Clearing browser data removes local recovery copies. Undo is available during the current session.
Opening an existing project? Use Session → Open session to load your .ems file. Browser recovery copies belong to the device, browser and website where they were recorded; keep a downloaded session as your portable backup.
Stopped position seconds Undo selected tape Clear selected tape Selected tape WAV ↓ Print tailNone 2 seconds 4 seconds 8 seconds Print mix Mix WAV ↓
Bounce selected sources
Auto + armed writes notes, expression and controls while transport runs; disarm to replay. REC prints the instrument into audio, so only mixer moves are automated. Bounce is before master effects and replaces the destination; source tracks remain available.
Rendering runs off the audio clock and writes to disk. Source tapes stay intact. A bounce replaces the destination with rendered audio; Undo restores its previous take. Live input must be recorded before rendering.
Master & tape colour Eight interchangeable instruments and audio channels, a ten-minute tape, expressive playing and sequences you can change as you record. Build a small performance, then keep the parts you like.
Screen map Your first track Controllers & inputs Recording & Auto
1 TRANSPORTPlay · stop · record · time 2 SESSION CONTROLSTempo · scale · tape speed · click 3 THE TAPEEight thin lanes · recorded spans · moving head 4 CHANNELS 01–08Instrument / input · Live / Sequence / Tape / Auto · arm · level ▥ ▥ ▥ ▥ ▥ ▥ ▥ ▥ 6 MASTERMix · tape colour
5 SELECTED INSTRUMENTSound · Sequence · Effects · Motion · Evolve · Sample / loop Keep the performance in reach. 1 / Transport controls the whole session. Record armed captures only the channels you armed. Its neighbouring Record mode chooses Overdub / add or Replace / punch in. MIDI / MPE to follows the selected instrument or stays on a fixed channel. Panic clears held notes and effect tails.
2 / Session sets tempo, key and mode. Each instrument can follow these or keep its own scale. Tape speed changes recorded audio’s pitch and duration together.
3 / Tape shows where audio actually exists. Click a lane while stopped to move the head. Tape / bounce opens printing, bounce, undo and punch settings.
4 / Channels can hold any instrument—including repeated copies. The triangle starts a sequence; the square returns it to live playing. Level remains available for fades.
5 / Workbench follows the selected channel. Tabs keep the local controls together. In Sequence, select a step and its note slot to set velocity, chance, repeats and pitch.
6 / Master opens the mix and tape effects. Click Master again to return to the instrument panel you were using.
Click a part of the diagram to jump there. Audio & MIDI and Session are always in the top corner. Close a slide-out with ×, Escape or a click outside.
Choose a sound. Select a channel, then choose its instrument from the strip. Try Harp → Sound → Guitar, Bass → Acid, or Attractor → Razor lead. Keep the master around −12 dB to leave room for more layers.
Play something small. No hardware needed: Sound combines the playing surface and sound controls. Press the on-screen keys or A S D F G H J K; the note keys keep working while you adjust sliders. Typing in text or number fields edits those fields. Press and drag the dark playing surface: across bends pitch, up/down changes colour. A pressure-sensitive screen adds pressure; a mouse uses a steady playing pressure.
Let a phrase run. Open Sequence. Click empty grid space to add up to four notes in a step. Drag a note sideways to move it in time and vertically to change pitch; drag its right edge for its own length. Double-click removes only that note. The four note tabs provide individual velocity, chance, repeat and length. Arrow keys move the selected grid note; Shift plus left/right changes its length; Delete removes it. Drums use four named lanes. Evolve → Starting phrase supplies a pattern you can change. Start it with the strip’s triangle.
Add and record. Choose another channel and play over the phrase. Arm the channels you want with REC, choose a count-in if useful, then Record armed. Move controls as you play. Stop, select Tape on recorded channels, rewind and listen.
Make a variation and keep it. Copy a pattern from A to B and change a few steps. Song accepts chains such as A A B A. Tape / bounce → Print mix renders a WAV without waiting for real-time playback. Session → Save session keeps tapes, samples, patterns and settings together.
Just a computer. Use screen keys, the playing surface, computer keys and sequencers. Load a sound into an Audio / media channel and play it as a sampled instrument. Your computer’s microphone can record a voice or nearby sound. Headphones let you monitor a live microphone without feeding speakers back into it.
A standard MIDI keyboard. Select it in MIDI input at the top. In Audio & MIDI, choose Standard MIDI. Notes, velocity, sustain and the controller’s available expression work. Ordinary channel pitch bend affects notes sharing that channel.
An MPE controller. LinnStrument and similar controllers give each note its own pitch, pressure and slide. A connected LinnStrument is selected automatically when there is no saved device choice. Start with Lower zone and ±48 semitones, matching the controller. Attractor leads and the Harp respond naturally to held pressure and gliding fingers. Motion adds channel movement; native per-note expression remains active.
An audio interface. Connect it through Audio & MIDI. Assign Audio / media to any channels and select each input from its strip. A single mic on physical input 1 should use 1 mono to centre it. A stereo synth on inputs 1 and 2 should use 1–2 stereo . The list reflects the channels the browser receives from your interface; up to eight stereo tracks can record together.
First connection and reconnecting The browser may require one click to start audio and permission for MIDI or a microphone. The studio restores the saved output during loading. If automatic sound is blocked, the first click or keypress enables audio. After permission, it also reconnects the saved MIDI choice and previously enabled input on your next visit. Choose a channel in Live mode to play it. Choose a fixed MIDI destination directly on the transport row with MIDI / MPE to, or choose Selected instrument to follow channel selection. Audio & MIDI has bend range, output selection and MIDI Learn.
If there is no sound: check Audio on, the chosen channel’s Live mode, mute/solo, master level and your output. For a sampler, load or record a sample first—recording a loop is separate. MIDI clock messages do not stop this studio’s transport.
REC: keep the actual sound. Arm a Live or Sequence channel, then Record armed. Its instrument and local effects are recorded into tape audio. Those changes are already in the take; they are not replayed as a second layer of synthesis. Mixer level, pan, mute and solo movements are retained as automation for the mix.
Auto: keep the performance controls. Choose Auto and arm the strip. While transport runs, notes, MPE gestures and dial movements are written onto the session timeline. Its sequence shortcut still works. Disarm to replay the automation. Auto takes use the instrument again when playing or printing, so you can keep shaping the sound.
Loops and playable samples. On Audio / media, Sample / loop has separate Record loop and Record sample buttons. Loops start on the next bar and can overdub, reverse, run at half speed, pause, restart or undo. Overdub feedback controls how much of the old loop remains. Samples have trim points, a root note and held-loop or one-shot playback. Detect root works best on a clear single note.
Bounce, print and save. Print renders the mix with master effects and tape colour. Bounce combines selected sources into a destination tape before master and tape colour; sources are muted, with their audio preserved. Undo restores the destination’s previous audio. Rendering speed depends on the patch and computer. Prepare mix on the transport row renders an audio preview that you can listen to and download. Nothing is uploaded. Save session downloads a portable .ems file; browser-disk recovery is available in Session.
Tape experiments Record a part at one speed, change speed and record another. Earlier tape changes pitch and length; the new live instrument stays playable. The thin lanes show occupied spans and the moving head. Beside Record armed, choose Replace / punch in to replace only the region you record, or Overdub / add to layer onto it. Tape audio can run for ten minutes; loops can run for up to five minutes. Audio writes to the browser’s private disk as you go.
After stopping, wait for Saved. A portable session is the best way to keep work across browsers or computers. Live microphone input must be recorded before an offline print.
Prepare a fresh mix of your tapes and enabled instruments, listen, then download the WAV.
Preparing stops transport and renders the current mix, including master and tape effects. Your session stays on this device. Use Session → Save session for a portable copy of the whole project.
Prepare mix & preview Nothing is uploaded. Prepare a mix to begin.
Download mix WAV